Adding too much chlorine to your swimming pool can be harmful. It stings your eyes and irritates your skin. Fortunately, there are several ways to reduce the amount of chlorine in your pool. The first option is to dilute the water in the pool. This process will reduce the amount of chlorine in the water by half. The second option is to stop adding chlorine. This method is the most expensive, but it does have some advantages. If you are looking for how to reduce chlorine in pools, read this article carefully.
Sodium thiosulfate is a chemical that reduces the amount of chlorine in a swimming pool. It is the cheapest and most reliable way to lower chlorine levels in a swimming pool. It works by reducing the chlorine level by about one part per million (ppm). However, it has one disadvantage: it can cause the water to become cloudy. This cloudiness will disappear after several days as it dissipates in water. Sodium thiosulfate should be used in smaller quantities, though, since the concentration of the chemical is high, it can lower the pH of the water.
One of the simplest ways to reduce chlorine levels in your swimming pool is to use hydrogen peroxide. You can purchase a pool-grade hydrogen peroxide that will react with chlorine to create water and oxygen. This chemical works best when the pH level of your water is at least 7.0. It will lower the pH level of the water after use, so you should always check and adjust the pH level before adding hydrogen peroxide to your pool.
Dilute your pool:
Dilution is the process of reducing the level of chlorine in your swimming pool by removing some water and replacing it with fresh water. This process is similar to total refill but with less of chemicals. It is best to check the chemistry of your pool’s tap water before dilution to ensure that the water is safe to use. Rainwater is another alternative to dilution because it contains zero TDS.
Stop adding chlorine:
The cheapest way to stop adding chlorine to your swimming pool is to let it gas off naturally. When you add chlorine to your swimming pool, you need to expose the water to the sunlight for about four hours. Aerating, circulating, and agitating the water will help the chlorine gas off faster. However, this method is not recommended for pools located in shady areas since sunlight can quickly remove chlorine from the water.